- Frame
- Hi-tensile steel
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 1995 Ross Beach Commander.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.56:1
Estimated speed at 90 RPMGear
Uses front tire 26×2.125; rear size isn’t listed.
Ratio2.44:1
Estimated speed at 90 RPMGear
Uses front tire 26×2.125; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
1995 Ross Beach Commander
1997 Ross Beach Commander
Overview
Model Year
1995
1997
Brand
Ross
Ross
Model
Beach Commander
Beach Commander
Bicycle Type
Cruiser
Cruiser
Original MSRP
$189.95
$199.95
Colors
Laser red, Transparent Burgundy, Vivid Transparent Blue, Vivid Transparent Violet, White Splatter
Blue, Laser red, Red, Transparent blue, Violet
Sizes
19", womens 14", womens 18"
19", womens 14", womens 18"
Weight
—
—
Frameset
Frame Construction
TIG-welded steel
TIG-welded
Frame Material
Hi-tensile steel
Hi-tensile steel
Fork
—
Ross
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Crankset
1-piece 6 1/2", 46 teeth
1-piece steel, 44 teeth
Bottom Bracket
—
One piece
BB Shell Width
—
68mm English
Rear Cogs
1-speed, 18 teeth
1-speed, 18 teeth
Chain
KMC 410, 1/2 x 1/8"
KMC 410, 1/2 x 1/8"
Pedals
Victor VP-810
Resin
Brakes
Brakes
—
Shimano coaster brake
Cockpit & Contact Points
Headset
1" CH-664
1" YST 665
Handlebar
Cruiser Bend
Cruiser Bend
Stem
BX-807
Aluminum
Saddle
Cruiser w/spring
Selle Master Comfort w/springs
Seatpost
Steel
Pillar, aluminum, 25.4 mm diameter
Wheels & Tires
Hubs
Front: King Kong nutted, Rear: Shimano coaster brake
Front: steel, nutted, Rear: Shimano coaster brake
Rims
Alloy, 36-hole
Rigida AS-32, 36-hole
Spokes
Stainless steel, 1.8 mm straight gauge
Richman stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.125" Ross C-241
26 x 2.125" classic whitewall
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
71°
Seat-tube angle
—
67°
Chainstay / rear center
—
445 mm
Wheelbase
—
1072 mm
Fork offset / rake
—
45 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.