Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2008 Norco Bushpilot and 2009 Norco BushPilot.

  2. Gearing

    2009 Norco BushPilot has a 14% lower climbing ratio than 2008 Norco Bushpilot.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2008 Norco Bushpilot42/34/24T · 11–30T · 8-speed
Lowest0.80:1Highest3.82:1Total range477%
Estimated speed at 90 RPMLowest gear5.6 mphHighest gear26.8 mph

Uses front tire 26×2.1; rear size isn’t listed.

2009 Norco BushPilot42/32/22T · 11–32T · 8-speed
Lowest0.69:1Highest3.82:1Total range555%
Estimated speed at 90 RPMLowest gear4.8 mphHighest gear26.5 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2008 Norco Bushpilot
2009 Norco BushPilot
Overview
Model Year
2008
2009
Brand
Norco
Norco
Model
Bushpilot
BushPilot
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$519.00
Not documented
Colors
—
White, Blue
Sizes
12.5", 15", 17", 18.5", 20", 22"
12.5", 15", 17", 18.5", 20", 22"
Weight
32 lb
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Aluminum
Hydraformed Aluminum
Fork
Suntour XCM-100, 100mm travel
SR Suntour XCM V2, 100mm travel
Fork Material
Single
Single
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano EF-60
Shimano ST-EF50
Front Derailleur
Shimano Altus, 31.8mm clamp
Shimano Acera, 31.8mm clamp
Rear Derailleur
Shimano Alivio
Shimano Alivio
Crankset
Shimano FC-M151, 24/34/42 teeth
Shimano FC-M151, 22/32/42 teeth
Bottom Bracket
Square taper
CH-52 cartridge
Cassette
—
Shimano HG30
Rear Cogs
8-speed, 11 - 30 teeth
8-speed, 11 - 32 teeth
Chain
KMC Z72, 1/2 x 3/32"
KMC Z72, 1/2 x 3/32"
Pedals
Wellgo LU-C4
MTB Resin
Brakes
Brakes
Hayes MX-4 mechanical w/6" rotor brakes, Shimano EF-60 levers
Hayes MX-4 mechanical w/6" rotor brakes, Shimano ST-EF50 levers
Cockpit & Contact Points
Headset
1 1/8" threadless Semi-integrated CH-918
1 1/8" threadless CH-918
Handlebar
Alloy riser
MTB Riser
Handlebar Extensions
—
Not included
Stem
Alloy
MTB Alloy
Saddle
Norco Adventure Custom
Norco MTB
Seatpost
Norco, 27.2mm diameter
Kalloy
Wheels & Tires
Hubs
KT disc
Formula
Rims
Weinmann, 32-hole
DDM-1 Disc, 32-hole
Spokes
Stainless steel, 14ga. (2.0mm)
Stainless, 14ga. (2.0mm)
Front Tire
26 x 2.10" Vee Rubber
26 x 1.95" Innova
Wheel Size
26" wheels
26" wheels

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.

Sponsored affiliate link
Scroll to Top