Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 2010 Schwinn Le Tour.

  2. Gearing

    2010 Schwinn Le Tour has a 23% lower climbing ratio than 1996 Schwinn Le Tour.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    1996 Schwinn Le Tour had an original MSRP $250 lower than 2010 Schwinn Le Tour.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2010 Schwinn Le Tour52/42/30T · 12–26T · 8-speed
Lowest1.15:1Highest4.33:1Total range376%
Estimated speed at 90 RPMLowest gear8.3 mphHighest gear31.0 mph

Uses front tire 700C×28; rear size isn’t listed.

1996 Schwinn Le TourSize Legacy reference · 53/39T · 13–26T · 7-speed
Lowest1.50:1Highest4.08:1Total range272%
Estimated speed at 90 RPMLowest gear10.6 mphHighest gear28.9 mph

Uses front tire 700C×25; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2010 Schwinn Le Tour
1996 Schwinn Le Tour
Overview
Model Year
2010
1996
Brand
Schwinn
Schwinn
Model
Le Tour
Le Tour
Bicycle Type
Road/sport
Road/sport
Original MSRP
$699.99
$449.95
Colors
Pearl White
Dark blue
Sizes
S, M, L, XL
50 cm, 52 cm, 54 cm, 56 cm, 58 cm, 60 cm
Weight
—
24 lb
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Schwinn N'Litened Aluminum
Chromoly main triangle/hi-tensile steel rear stays
Fork
Schwinn
Schwinn
Fork Material
N'Litened Aluminum, unicrown crown
Chromoly, unicrown crown
Drivetrain
Component Group
Road Mix
Shimano RSX/300EX
Shifters
Shimano 2200 STI
Shimano RSX down-tube
Front Derailleur
Shimano 2200
Shimano 300EX, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Sora
Shimano RSX SS
Crankset
FSA Tempo Triple, 52-42-30 teeth
Tracer, 39/53 teeth
Bottom Bracket
FSA cartridge sq. JIS taper
Shimano BB-LP26, 116 mm spindle
BB Shell Width
—
68mm English
Cassette
SRAM PG-850
—
Rear Cogs
8-speed, 12 - 26 teeth
7-speed, 13 - 26 teeth
Chain
KMC HG-50
Shimano CN-HG50, 1/2 x 3/32"
Pedals
Resin body with steel cage and axle and toe clip & straps
Steel cage, alloy body w/clips & straps
Brakes
Brakes
Tektro R316 Long Reach Dual-Pivot brakes, Shimano 2200 STI levers
Shimano 300EX brakes, Shimano 300EX levers
Cockpit & Contact Points
Headset
1 1/8" threadless FSA
1" Tien Hsin TH-508 steel
Handlebar
Road Tuned 6000 series alloy ergonomic drop bar, 26.0
Steel w/alloy drop bars
Handlebar Extensions
Not included
—
Stem
Schwinn Road Tuned
Alloy
Saddle
Bio Tuned
Schwinn
Seatpost
Alloy Micro Adjust
Kalloy alloy, 26.8 mm diameter
Wheels & Tires
Hubs
KT alloy road sealed mechanism QR
—
Rims
Weinman SP-17, 32-hole
Araya SP-30, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm)
Stainless steel, 2.0mm straight gauge
Spoke Nipples
CP Brass
Brass nipples
Front Tire
700 x 28c Kenda K-193
700 x 25c road tread
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
73°
Seat-tube angle
—
73.5°
Chainstay / rear center
—
420 mm
Wheelbase
—
1007 mm
Fork offset / rake
—
40 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top