Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Identity & price

    These bicycles are categorized differently: 2003 Kona Makena is Mountain; 2005 Kona Makena is Kids.

  2. Data limitation

    No geometry is recorded for 2005 Kona Makena.

  3. Gearing

    2003 Kona Makena has a 40% lower climbing ratio than 2005 Kona Makena.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2003 Kona MakenaSize Legacy reference · 42/34/24T · 14–28T · 6-speed
Lowest0.86:1Highest3.00:1Total range350%
Estimated speed at 90 RPMLowest gear4.4 mphHighest gear15.3 mph

Uses front tire 20×1.5; rear size isn’t listed.

2005 Kona Makena40T · 14–28T · 6-speed
Lowest1.43:1Highest2.86:1Total range200%
Estimated speed at 90 RPMLowest gear7.6 mphHighest gear15.2 mph

Uses front tire 20×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2003 Kona Makena
2005 Kona Makena
Overview
Model Year
2003
2005
Brand
Kona
Kona
Model
Makena
Makena
Bicycle Type
Mountain bike, front suspension
Juvenile mountain bike, suspension
Original MSRP
$229.00
$249.00
Colors
Yellow
Blue
Sizes
13"
Boys
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum, double-butted
7005 aluminum
Fork
Suntour M-5000
SR Suntour M-5000, 30mm travel
Fork Material
Aluminum/magnesium, single crown
Aluminum, single crown
Drivetrain
Component Group
Mountain Mix
Juvenile Mix
Shifters
Shimano Revo Twist 6 speed
Shimano SL-RS-31-6 Revo
Rear Derailleur
Shimano Tourney
Shimano RD-FT-30 SS
Crankset
Dotek aluminum, 24/34/42 teeth
ProWheel RS116, 40 teeth
Bottom Bracket
VP cartridge
Chin Haur CH-32
Rear Cogs
6-speed, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
KMC Z-50, 1/2 x 3/32"
KMC Z50, 1/2 x 3/32"
Pedals
Victor VP junior
VP Jr.
Brakes
Brakes
APSE XC Linear brakes, APSE XC Linear levers
APSE brakes, APSE levers
Cockpit & Contact Points
Headset
1 1/8" threadless VP Threadless
1" threaded VP-501
Handlebar
Kona Aluminum Riser
Aluminum, 1" rise
Handlebar Extensions
Not included
Not included
Stem
Kona Control
Kona Control
Saddle
Velo Junior
Velo Jr.
Seatpost
Kona XC
Msp
Wheels & Tires
Hubs
Joy Tech nutted
Jt
Rims
Strong
Alex Y-2000, 28-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 x 1.50" Cheng Shin
20 x 1.95" Cheng Shin
Wheel Size
20" wheels
20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
70.5°
—
Seat-tube angle
73°
—
Chainstay / rear center
375.9 mm
—
Wheelbase
871.2 mm
—
Fork offset / rake
38.1 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top