Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1997 Peugeot X-Country.

  2. Gearing

    1994 Peugeot X-Country has a 8% lower climbing ratio than 1997 Peugeot X-Country.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1994 Peugeot X-CountrySize Legacy reference · 42/34/24T · 11–28T · 7-speed
Lowest0.86:1Highest3.82:1Total range445%
Estimated speed at 90 RPMLowest gear6.2 mphHighest gear27.6 mph

Uses front tire 700C×32; rear size isn’t listed.

1997 Peugeot X-Country46/36/26T · 11–28T · 7-speed
Lowest0.93:1Highest4.18:1Total range450%
Estimated speed at 90 RPMLowest gear6.6 mphHighest gear29.9 mph

Uses front tire 700C×28; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1994 Peugeot X-Country
1997 Peugeot X-Country
Overview
Model Year
1994
1997
Brand
Peugeot
Peugeot
Model
X-Country
X-Country
Bicycle Type
Touring
Touring
Original MSRP
$669.00
$700.00
Colors
—
Matte charcoal
Sizes
17.7", 19.7", 21.7", 23.5"
45 cm, 50 cm, 55 cm, 60 cm
Weight
—
—
Frameset
Frame Construction
Fillet brazed steel
Silver brazed
Frame Material
Ishiwata chromoly, triple-butted
True Temper OXII
Fork
Steel, unicrown
Peugeot
Fork Material
—
4130 chromoly, unicrown crown
Drivetrain
Component Group
Shimano STX
Shimano RSX
Shifters
Shimano SL-BS50 bar-end 7-speed
Shimano RSX STI Dual Control
Front Derailleur
Shimano STX
Shimano RSX top-swing, top-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Deore LX
Shimano RSX GS
Crankset
Shimano STX, 24/34/42 teeth
Shimano RSX, 26/36/46 teeth
Bottom Bracket
—
Shimano BB-LP26
BB Shell Width
—
68mm English
Rear Cogs
7-speed, 11 - 28 teeth
7-speed, 11 - 28 teeth
Chain
Kmc
Shimano CN-IG51, 1/2 x 3/32"
Pedals
HTI alloy/steel
Wellgo LU-946A w/clips & straps
Brakes
Brakes
Shimano STX brakes, levers
Shimano STX M-System brakes, Shimano RSX levers
Cockpit & Contact Points
Headset
—
1" YST 8002
Handlebar
Ergonomic drop
ITM Super Europa
Stem
Kalloy alloy
Meng Jing MJ-1041
Saddle
Velo Turbo Gel
Selle Bassano Frontera
Seatpost
Kalloy alloy
Kalloy SP-263
Wheels & Tires
Hubs
Shimano Alivio
Shimano Alivio
Rims
Sun Metal Chinook, 36-hole
Sun Rims CR18, 36-hole
Spokes
—
Marwi stainless steel, 2.0mm straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
700 x 32c Michelin World Tour
700 x 28c Hutchinson
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
71°
—
Seat-tube angle
73°
—
Chainstay / rear center
429.3 mm
—
Wheelbase
1069.3 mm
—
Fork offset / rake
45.7 mm
—

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top