Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2006 GT Power Series Expert and 2007 GT Power Series Expert.
- Gearing
2006 GT Power Series Expert has a 13% lower climbing ratio than 2007 GT Power Series Expert.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio2.63:1
Speed unavailable: wheel or tire size is missing or unclear.
Ratio3.00:1
Speed unavailable: wheel or tire size is missing or unclear.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2006 GT Power Series Expert
2007 GT Power Series Expert
Overview
Model Year
2006
2007
Brand
GT
GT
Model
Power Series Expert
Power Series Expert
Bicycle Type
BMX
BMX
Original MSRP
$369.99
$399.99
Colors
Team Blue/Silver two tone
Blue/Black
Sizes
20" wheel
20" wheel
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum
6061 T6 aluminum
Fork
GT BMX design
GT BMX design
Fork Material
Aluminum/chromoly
Aluminum, unicrown crown
Drivetrain
Component Group
BMX
BMX Mix
Crankset
AC Mini LE forged aluminum 3pc, 42 teeth
GT forged aluminum 3pc., 42 teeth
Bottom Bracket
European size sealed cartridge bearing
Euro cartridge
Rear Cogs
1-speed, 16 teeth
1-speed, 14 teeth
Chain
KMC Z610
KMC Z610
Pedals
Jr. BMX platform, aluminum, Cr-Mo axle
Jr. BMX platform, aluminum
Brakes
Brakes
Alloy side-pull caliper front/Tektro, 926AL, Mini V-brake, cold forged aluminum rear brakes, Tektro, 316A, aluminum levers
Alloy side-pull caliper front/Tektro, 926AL rear brakes, Tektro 316A levers
Cockpit & Contact Points
Headset
1 1/8" FSA Orbit IS-2
1 1/8" integrated FSA Orbit IS-2
Handlebar
GT BMX design, aluminum, 6.7" rise
GT BMX aluminum
Handlebar Extensions
—
Not included
Stem
'05 GT BMX Race design, cold forged aluminum, 1-1/8"
GT BMX Race
Saddle
GT mini design, padded with integrated aluminum post
GT Mini
Seatpost
Aluminum, 22.2mm (7/8 inch) diameter
Aluminum, 22.2mm (7/8 inch) diameter
Wheels & Tires
Hubs
GT BMX race design, aluminum body, sealed cartridge bearings
Front: GT BMX sealed, Rear: BMX Race cassette
Rims
Sun M13-II, double wall, aluminum, 32 hole, eyelets, 32-hole
Sun M13-II, 32-hole
Spokes
15ga. (1.8mm) Straight Gauge
15ga. (1.8mm) straight gauge
Spoke Nipples
Aluminum nipples
Aluminum nipples
Front Tire
20 x 1-3/8" Kenda Krankit
20 x 1-3/8" Kenda Small Block Eight
Wheel Size
20" wheels
20" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.