- Frame
- Reynolds chromoly
- Groupset
- Track Mix
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 KHS Flite 100.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Ratio3.00:1
Estimated speed at 90 RPMGear
Uses front tire 700C×23; rear size isn’t listed.
Ratio3.00:1
Estimated speed at 90 RPMGear
Uses front tire 700C×23; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 KHS Flite 100
2004 KHS Flite 100
Overview
Model Year
2005
2004
Brand
KHS
KHS
Model
Flite 100
Flite 100
Bicycle Type
Track
Track
Original MSRP
$599.00
$659.00
Colors
Yellow
Blue
Sizes
S, M, L
50cm, 53cm, 57cm, 60cm
Weight
19.3 lb
19.3 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Reynolds chromoly
Reynolds 520
Fork
Khs
Khs
Fork Material
Chromoly, aero crown
Chromoly, semi-sloping crown
Drivetrain
Component Group
Track Mix
Track Mix
Crankset
TruVativ Touro, 48 teeth
Sugino SG-75, 48 teeth
Bottom Bracket
Cartridge
Sealed cartridge
BB Shell Width
—
68mm English
Rear Cogs
1-speed, 16 teeth
1-speed, 16 teeth
Chain
KMC Z30, 1/2 x 3/32"
KMC Z30, 1/2 x 1/8"
Pedals
Aluminum cage
Aluminum w/clips & straps
Cockpit & Contact Points
Headset
Tien Hsin TH-3600
1" Tien Hsin 3600
Handlebar
Aluminum
Aluminum drop bar
Handlebar Extensions
Not included
Not included
Stem
Hsin Lung aluminum
Hsin Lung aluminum
Saddle
Khs
KHS Padded
Seatpost
Aluminum micro-adjust
Aluminum micro-adjust
Wheels & Tires
Hubs
Front: aluminum, Rear: aluminum track
Aluminum, nutted
Rims
Aluminum, 36-hole
Aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
700 x 23c Kenda Koncept
700 x 23c KHS
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
74°
Seat-tube angle
—
74°
Chainstay / rear center
—
425 mm
Wheelbase
—
981 mm
Fork offset / rake
—
22 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.