- Frame
- Superlight AN6/Muscle stays
- Groupset
- Shimano Dura-Ace
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
- Frame
- 6000 aluminum, carbon stays
- Groupset
- Shimano Dura-Ace
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 KHS Flite Team.
- Data limitation
Only 2003 KHS Flite Team has enough published drivetrain data for gearing calculations.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Gearing unavailable for this size.
Lowest1.70:1Highest4.82:1Total range284%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 700C×23; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 KHS Flite Team
2003 KHS Flite Team
Overview
Model Year
2005
2003
Brand
KHS
KHS
Model
Flite Team
Flite Team
Bicycle Type
Road race & triathlon
Road race & triathlon
Original MSRP
Not documented
$2,999.00
Colors
—
Red/White
Sizes
—
50cm, 52cm, 54cm, 56cm, 58cm, 60cm
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Superlight AN6/Muscle stays
6000 aluminum, carbon stays
Fork
Khs
Khs
Fork Material
Carbon fiber, aero crown
Carbon fiber composite w/carbon fiber steerer, sloping crown
Drivetrain
Component Group
Shimano Dura-Ace
Shimano Dura-Ace
Shifters
Shimano Dura-Ace STI Dual Control
Shimano Dura-Ace STI Dual Control
Front Derailleur
Shimano Dura-Ace
Shimano Dura-Ace
Rear Derailleur
Shimano Dura-Ace
Shimano Dura-Ace
Crankset
FSA Carbon, 39/53 teeth
Shimano Dura-Ace, 39/53 teeth
Bottom Bracket
Shimano Dura-Ace
Shimano BB-7700, 109.5mm spindle
BB Shell Width
—
68mm English
Rear Cogs
9-speed, 23 - 11 teeth
9-speed, 11 - 23 teeth
Chain
Shimano Dura-Ace, 1/2 x 3/32"
Shimano CN-7700, 1/2 x 3/32"
Pedals
Not included
Not included
Brakes
Brakes
Shimano Ultegra Dual Pivot brakes, Shimano Dura Ace STI levers
Shimano Ultegra Dual Pivot brakes, Shimano Dura-Ace STI Dual Control levers
Cockpit & Contact Points
Headset
1 1/8" integrated FSA Orbit IS
1 1/8" integrated FSA Orbit IS
Handlebar
TTT Forgie XL
3T Forgie XL
Handlebar Extensions
Not included
Not included
Stem
TTT Forgie XL
3T Forgie XL
Saddle
Selle Italia SLR
Selle Italia SLR
Seatpost
Easton EC-70
Easton EC70
Wheels & Tires
Hubs
Velomax
Velomax
Rims
Velomax Circuit Comp, 24-hole/28-hole
Velomax Circuit Comp, 24-hole/28-hole
Spokes
Wheelsmith stainless steel, double-butted
Wheelsmith stainless steel, 14/15ga. (2.0/1.8mm) double-butted
Spoke Nipples
—
Brass nipples
Front Tire
700 x 23c Panaracer Stradius Pro Kevlar
700 x 23c Panaracer Stradius Pro kevlar
Wheel Size
700c wheels
700c wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
73.5°
Seat-tube angle
—
72°
Chainstay / rear center
—
410 mm
Wheelbase
—
981 mm
Fork offset / rake
—
43 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.