1996 Ritchey Everest

Archived: 1996 Ritchey Everest · Mountain bike, non-suspension · Published sizes: 15", 16", 17", 18", 19", 20", 21", 22", 23"

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Fillet brazed steel · Fork: Ritchey Logic · Ritchey Prestige, unicrown crown

• Check paint damage, vent holes and accessible internal surfaces for corrosion. Look for dents, bent tubes and cracking around welded or brazed joints.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Ritchey WCS · Shifters: Grip Shift SRT-800 X-Ray · Front derailleur: Shimano Deore XT, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Deore XT GS · Crankset: Ritchey Logic, 24/36/46 teeth · Bottom bracket: Ritchey ProLite titanium, 120 mm spindle · Rear cogs: 8-speed, 12 - 26 teeth · Chain: Sachs SCM55, 1/2 x 3/32"

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Ritchey WCS brakes, Ritchey WCS Logic levers

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 26" wheels · Rims: Front: Ritchey Rock 395, Rear: Ritchey Rock 415, 32-hole · Front tire: Front: 26 x 2.10" Ritchey Mega-Bite Z-Max kevlar, Rear: 26 x 2.10" Ritchey Omega Bite WCS

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: 1" Ritchey Pro WCS · Handlebar: Ritchey WCS ProLite · Stem: Ritchey WCS · Seatpost: Ritchey Pro WCS, 26.8 mm diameter · Saddle: Ritchey Vector WCS, titanium rails · Pedals: Ritchey Logic WCS titanium (clipless)

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.