2022 Polygon Siskiu D6

Archived: 2022 Polygon Siskiu D6 · Mountain · Published sizes: 27.5” SM, 27.5” MD, 29” MD, 29” LG, 29” XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: ALX XC TRAIL FRAME · Fork: SUNTOUR XCM BOOST 120mm TRAVEL

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: SUNTOUR XCM BOOST 120mm TRAVEL · Rear shock: SUNTOUR RAIDON LO AIR, E2E: METRIC 190x45mm

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: SHIMANO, 10-SPEED TRIGGER · Rear derailleur: SHIMANO DIRECT ATTACH · Crankset: 32T · Bottom bracket: BSA THREADED 68/73mm · Cassette: SHIMANO, 11-48T · Chain: KMC CHAIN

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SHIMANO HYDRAULIC DISC; Levers: SHIMANO LEVER; Rotors: SHIMANO SM-RT10 F:180mm R:160mm CENTER-LOCK

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheels: POLYGON TUBELESS READY W/ TUBELESS TAPE · Rims: ALLOY DOUBLE WALL 584 / 622-24 32H FOR TYRE 584 / 622-35/68 · Hubs: F: SHIMANO HB-MT400-B THRU AXLE 15x110mm 32H CENTER LOCK / R: SHIMANO FH-MT400-B THRU AXLE 12X148mm 32H CENTER LOCK · Front tire: DELI 27.5"x2.25" / 29"x2.25" · Rear tire: DELI 27.5"x2.25" / 29"x2.25"

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance. This record indicates different front and rear wheel diameters, so verify each tire at its correct end.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: THREADLESS ZERO STACK HEADSET, ZS 44/28.6 | ZS 56/30 · Handlebar: ENTITY diganti menjadi POLYGON SPORT · Stem: ENTITY diganti menjadi POLYGON SPORT · Seatpost: ALLOY DROPPER 150mm TRAVEL · Saddle: VOID SADDLE · Pedals: PP PEDAL

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.