2015 Dean Torrey's Ti. Cross Frame

Archived: 2015 Dean Torrey's Ti. Cross Frame · Cyclocross · Published sizes: 48, 50, 52, 54, 55, 56, 57, 58, 60, 61, 62cm

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: 3/2.5 seamless, cold worked, stress relieved titanium, Breezer style dropouts

• Inspect every weld for cracking and check that the seatpost, bottom bracket and other threaded components are not seized or galled in place.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Group: Ultegra, 105, Force, Rival, Chorus, Athena build options

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

• Identify the installed brake type and actuation before choosing replacement parts or service procedures. Inspect every installed pad and braking surface, then check the complete cable, hose or linkage path for damage, corrosion, leaks or binding.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

• Apply the front brake and rock the bicycle to check the headset for play or notchiness. Inspect the handlebar, stem and clamp areas, then confirm every control is secure.
• Confirm the seatpost can be adjusted and that the saddle, pedals and their mounting hardware have no cracks, severe corrosion, looseness or damaged threads.

• Spin both wheels and watch for side-to-side or vertical movement. Check rim condition, spoke tension and each hub for roughness or play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads. Confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.