2018 Cannondale Habit Carbon 2 SE

Archived: 2018 Cannondale Habit Carbon 2 SE · Mountain · Published sizes: S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Habit 27.5, 120mm, BallisTec Carbon, Carbon Link, SmartForm C1 Alloy swingarm, PF30, Flat Mount Brake, Pivoting Der Hanger, 1.5 Si headtube · Fork: RockShox Pike RC 130mm, Solo Air Spring, Charger Damper BOOST 110x15, Maxle Stealth, 46mm offset

• Inspect composite areas in bright light for impact marks, cracks, ripples or crushed clamp zones. Check metal sections and welds separately for dents or cracking.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: RockShox Pike RC 130mm, Solo Air Spring, Charger Damper BOOST 110x15, Maxle Stealth, 46mm offset · Rear shock: Fox Float DPS Performance EVOL SV, 3 Position Adjust

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: SRAM GX Eagle 12-speed Trigger · Rear derailleur: SRAM GX Eagle, 12-speed · Crankset: TRUVATIV DESCENDANT Eagle 7K · Bottom bracket: Cannondale Alloy PressFit30 · Rear cogs: SRAM 1275 Eagle 10-50t, 12-speed · Chain: SRAM GX Eagle w/ Powerlock, 12-speed

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SRAM Guide R, 180/180mm, Centerline Rotors

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 27.5" · Rims: WTB Frequency Race i29 TCS 27.5, Tubeless Ready, 29mm Inner · Hubs: Lefty 60 front, Custom DT-Swiss straight pull 28 hole rear. · Front tire: Maxxis DHF 275x2.3”, 3C Compound, Tubeless Ready front, Ardent 27.5x2.25” Tubeless Ready rear, gumwall · Rear tire: Maxxis DHF 275x2.3”, 3C Compound, Tubeless Ready front, Ardent 27.5x2.25” Tubeless Ready rear, gumwall

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: Cannondale HeadShok Si · Handlebar: Cannondale C3 riser, Alloy, 4° upsweep, 9° backsweep, 760x15mm · Stem: Cannondale C1, 6061 Alloy, 60mm, 31.8, 5° · Seatpost: RaceFace Aeffect Dropper, 31.6mm, 125/150mm travel. · Saddle: Fabric Scoop Shallow Elite

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.