2026 Scott Scale RC Team

Archived: 2026 Scott Scale RC Team · Mountain · Published sizes: S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Scale Carbon HMF Adjustable head angle, Syncros Cable Integration System Advanced Shock & Standing Damping System BB92, UDH Interface, 12x148mm with 55mm Chainline · Fork: RockShox SID SL 3P Air Rush RL 3-Mode Damper 15x110mm Maxle Stealth, 44mm offset, Tapered steerer Lockout, Reb. Adj., 110mm travel

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: RockShox SID SL 3P Air Rush RL 3-Mode Damper 15x110mm Maxle Stealth, 44mm offset, Tapered steerer Lockout, Reb. Adj., 110mm travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Shifters: SRAM AXS Pod Controller · Rear derailleur: SRAM S1000 Eagle AXS Transmission 12 Speed Wireless Electronic Shift System · Crankset: SRAM Eagle 70 Transmission DUB, 55mm CL, 34T · Bottom bracket: SRAM DUB PF 92 MTB Wide, shell 41x92mm · Cassette: SRAM Eagle XS 1270 V2 Transmission 10-52 · Chain: SRAM CN Eagle 70 Transmission

• Confirm every shift battery charges and every control operates. Shift through the full cassette under light load while checking pairing, derailleur alignment and response at both ends of the range.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SRAM DB6 4-Piston Disc; Rotors: SRAM Centerline CL Rotors 180/F and 160/R

• Inspect pads, rotors, calipers and the complete cable or hose path. Both levers should feel consistent and both calipers should release without persistent rubbing.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 29 · Wheels: Syncros Silverton 2.5-30 CL F: 15x110mm, R: 12x148mm 30mm Tubeless ready rim 28H, Syncros Axle w/Removable Lever with 6mm Allen, T30 and T25 Tools · Front tire: Maxxis Rekon Race, 29x2.4", 120TPI Foldable Bead,Tubeless Ready, EXO · Rear tire: Maxxis Rekon Race, 29x2.4", 120TPI Foldable Bead,Tubeless Ready, EXO

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: Syncros - Acros Angle adjust & Cable Routing HS System +-0.6° head angle adjustment ZS56/28.6 – ZS56/40 MTB · Handlebar: Flat Bar, 8°, 740mm Syncros Fraser 2.0 XC Alloy 6061 D.B. Syncros Performance XC lock-on grips · Stem: Syncros XC 2.0 Syncros Cable Integration System -12° rise 6061 Alloy, 31.8mm, 1 1/8" · Seatpost: Syncros Duncan Dropper 1.5XC, 31.6mm all sizes 100mm · Saddle: Syncros Belcarra V2.5 Cut Out

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.