2026 Colnago Y1Rs Campagnolo Super Record WRL

Archived: 2026 Colnago Y1Rs Campagnolo Super Record WRL · Road · Published sizes: XS, S, M, L, XL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Colnago Y1Rs carbon frame · Fork: Bayonet fork for disc brakes, integrated cables

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Campagnolo Super Record WRL · Shifters: Campagnolo Ergopower DB Super Record WRL 12V · Front derailleur: Campagnolo Super Record WRL - FD23-SR12WRL · Rear derailleur: Cambio Campagnolo Super Record WRL12v - RD23-SR12WRL · Crankset: 52-36T · Bottom bracket: BSA · Cassette: 11-36 · Chain: Super Record WRL 12S

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Campagnolo Super Record WRL - Standard Flat Mount

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheels: Bora Ultra WTO 45 Disc Brake · Rims: Material: H.U.L.C. carbon fiber UD with high resistance properties - C-Lux finishing; Rim Height: 45 mm; Internal Channel Width: 21 mm · Hubs: Carbon HubsCULT™ ceramic bearingsIntegrated flanges · Front tire: Enve WS SES 3.4 CPirelli PZero Race TLR 700x28Shimano Dura Ace C50Pirelli PZero Race 700x28Fulcrum Wind 420 DBPirelli PZero Race 700x28Fulcrum Racing 600 DBPirelli P7 Sport 700x28 · Rear tire: Enve WS SES 3.4 CPirelli PZero Race TLR 700x28Shimano Dura Ace C50…

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play. Inspect the carbon rims closely for impact marks, cracks, delamination or damage around spoke holes and bead hooks.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: ID:35 OD:47 36°/45° CeramicSpeed SLT Treated Bearings · Handlebar: Colnago CC.Y1 integrated Cockpit - regular geometry. · Stem: CCY1 integrated cockpit · Seatpost: Carbon seatpost, 0 or 15 offset mm, · Saddle: Scratch M5 Nack 140 Hard BlackSelle Italia SLR Boost Superflow Carbon Rail(subject to stock availability)

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.